Daikin Climate & Electrical Operating Environment in Supa MIDC Industrial Zone
International cleanrooms, precision automotive assembly, process water chillers, and extreme dry summer ambient conditions.
High-reliability 33kV dedicated industrial substation.
Supa Japanese Industrial Park • Pune-Ahmednagar Highway NH-753F • Parner Phata • Heavy Engineering Zone
Daikin Replacement Parts & Pricing in Supa MIDC Industrial Zone
| Component / Spare Part | Estimated Cost (₹) | Warranty Coverage | Action |
|---|---|---|---|
| 🔧 Daikin Genuine Inverter Outdoor Main PCB | ₹2,800 - ₹5,800 | 1 Year OEM Warranty | Check Stock |
| 🔧 Daikin Electronic Expansion Valve (EEV) Stepper Coil | ₹1,450 - ₹2,400 | 1 Year OEM Warranty | Check Stock |
| 🔧 Daikin Swing Compressor Dual Rotary (1.5 TR) | ₹7,500 - ₹12,500 | 5 Years Compressor Warranty | Check Stock |
| 🔧 Daikin BLDC Blower Motor (Indoor/Outdoor) | ₹1,850 - ₹3,200 | 1 Year Warranty | Check Stock |
| 🔧 Daikin Dual Thermistor Sensor Set (Room & Coil) | ₹650 - ₹1,150 | 6 Months Warranty | Check Stock |
| 🔧 Daikin Titanium Apatite Deodorizing Air Filter | ₹450 - ₹850 | Genuine OEM Part | Check Stock |
Daikin Diagnostic Error Codes Table
| Code | Reported Symptom / Diagnostic Failure | Certified Engineering Resolution |
|---|---|---|
| U4 | Communication error between indoor and outdoor units | Verify 3-wire signal transmission voltage (should pulse 0-55V DC). Check outdoor surge fuse and optical couplers on main PCB. |
| L5 | Inverter compressor instantaneous overcurrent (IPM trip) | Check compressor UVW winding resistance (balanced 0.8-1.5 ohms). Check IPM thermal paste and replace IPM module if shorted. |
| A6 | Indoor fan motor overload or lock condition | Inspect cross-flow blower wheel for foreign debris, test BLDC Hall sensor feedback pulses, replace fan motor if locked. |
| C9 | Indoor return air thermistor open or short circuit | Measure sensor resistance (20k ohm at 25°C). Verify wiring socket harness; replace thermistor probe. |
| E7 | Outdoor propeller fan motor overload or locked rotor | Check fan blade clearance, verify 310V DC bus voltage to outdoor fan motor, replace motor if internal drive IC failed. |
| J3 | Compressor discharge pipe thermistor malfunction | Measure sensor resistance (typically 50k-200k ohm depending on temp). Replace discharge probe if open-circuited. |
| F3 | Abnormal discharge pipe temperature (>115°C overheat) | Indicates severe refrigerant shortage or EEV restriction. Perform nitrogen leak check, vacuum, and recharge virgin R32/R410A. |
Frequently Asked Questions — Daikin in Supa MIDC Industrial Zone
How fast can a certified Daikin technician reach Supa MIDC Industrial Zone?
Our emergency technician mobile vans are strategically deployed across Supa MIDC Industrial Zone corridors. We guarantee doorstep arrival within <45 min arrival for breakdown calls, equipped with digital diagnostic tools and genuine parts.
Do you use 100% genuine OEM spare parts for Daikin in Supa MIDC Industrial Zone?
Yes. Every replacement inverter PCB, compressor, capacitor, sensor, or motor supplied by our Supa MIDC Industrial Zone Daikin center is a factory-certified genuine part backed by up to 1 year warranty.
Can you repair Daikin Inverter AC PCB boards on-site in Supa MIDC Industrial Zone?
Yes, our mobile vans carry component-level diagnostic testers. Minor relay and fuse faults are fixed on-site in Supa MIDC Industrial Zone. Complex IPM micro-soldering is completed at our Wagholi lab with guaranteed 24-hour turnaround.
What is the inspection and service charge for Daikin in Supa MIDC Industrial Zone?
Our diagnostic visit charge in Supa MIDC Industrial Zone starts from ₹299 (adjusted against the final repair bill). Pricing is 100% transparent with pre-approved estimates and zero hidden fees.
Other Daikin Authorized Centers Near Supa MIDC Industrial Zone
Nearest standby technician stations in the Pune-Nagar Road & Shikrapur corridor with guaranteed arrival under 45 mins.